Fraunhofer USA Center Midwest CMW
Fraunhofer USA Center Midwest CMW
© Fraunhofer IWS Dresden
Laser Heat Treatment

© Fraunhofer IWS Dresden

Laser Heat Treatment

 

© Fraunhofer IWS Dresden

Laser Hardening

Laser hardening can be used to locally improve the wear resistance and service life of parts for a wide variety of applications from press forming tools to oil drilling equipment. The technology is especially suitable for selective hardening of complex shaped parts, bores or edges, and applications where minimal heat input into the surrounding material is critical.

MORE INFO
 

ID Laser Hardening

The new Fraunhofer CLA ID-H Hardening head can be used to carry out laser beam hardening of hardenable steels and cast iron materials in confined spaces, typically inside rotating cylinders or tubes.
MORE INFO
 

© Fraunhofer USA CCL

Laser Softening / Laser Assisted Forming

Lasers can also be used for locally softening / increasing the ductility of sheet metal components, which is of particular interest for automotive applications, where improved formability for press and roll forming operations is required in order to produce advanced lightweight automotive body panels.
MORE INFO
 

Laser Color Marking

Lasers can be used to create permanent color mark on a metal surface. Laser color marking is based on surface oxidation and thin film effect and does not use any chemicals, coatings or tools. Different colors ranging from silver and gold to blue and green can be created.
MORE INFO
 

© Fraunhofer IWS Dresden

Process Control System

Further components for process monitoring are available for process safety and quality control. In this context, various camera systems can be used (e.g. E-MAqS camera). It is also possible to observe, and, if necessary, to record the complete process from above through the powder nozzle via the Fraunhofer E-MAqS camera system.

MORE INFO